Ramset 4RS27 .27 Cal Yellow Strip Fastener Load 100 Loads per Package
• For SA270, Cobra Viper and RT400 also Hilti DX-350, DX-351 and DX-36M
• 27 Caliber
• Power Level 4
• Color Coded Yellow
• 10 Strips of 10 Loads per Package
ITW Ramset/Red Head powder loads and tools match tolerances to provide optimum power within recognized national velocity standards. Available in color-coded 10-load discs, 10-load strips, and 100-load boxes. CAUTION Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in serious injury or death to users or bystanders. Powder Guide Power level is designated by the load level number marked on each box; also by the color of the box and each powder load. As the number increases, the power level increases.