Bussmann BP/UCB-10-RP Type I ATC Footprint 10 Amp Automatic Circuit Breaker with Snap-Off Blades
• UCB Type I ATC Footprint Circuit Breaker
• Rated 10 Amp at 12Vdc
• ATC footprint breakers match the blade footprint of ATC fuses
• Type I - Automatic Reset - Circuit breaker automatically resets itself after opening
• Feature "snap-off" universal blades
Bussmann BP/UCB-10-RP Type I ATC Footprint 10 Amp Automatic Circuit Breaker - UCB breakers feature "snap-off" universal blades that can easily be sized to fit applications where fuse block spacing is tight, or the fuse terminal is recessed. Breakers are designed to fit ATC style fuse panels. Type I - Automatic Reset Circuit breaker automatically resets after opening. If the fault still exists, the breaker will continue to cycle between ON and OFF positions until the overload is corrected. These devices are sometimes called "cycling breakers." Type I/Automatic Reset circuit breakers do not address, or correct, overcurrent or fault conditions. They only react by cycling OFF and ON. Any overcurrent or fault condition that causes any Type I circuit breaker to operate should be corrected as soon as possible. Continual vehicle operation under an overcurrent or fault condition (causing the Type I circuit breaker to cycle) is NOT recommended.