Bussmann BP/HFB-RP In-Line Water-Resistant 1/4" x 1-1/4" Glass Tube Fuse Holder (30 Amp Max)

• Glass Tube In-Line Holders For 1/4" Diameter x 1-1/4" Length Fuses

• Rated to 30 Amps at 32V

• Water-resistant-yellow body

• Use with #12 to 18 wire

• Fuses NOT Included

Bussmann BP/HFB In-Line Water-Resistant 1/4" x 1-1/4" Glass Tube Fuse Holder. For 1/4" x 1-1/4" (6.35mm x 31.8mm) fuses. Ideal for harsh environments, Water, Salt Spray, Ultraviolet Light, Ozone. -40° to 150°C temperature range. Withstands many organic solvents and rigorous shock and vibration. Accepts #18 to #12 AWG copper wire. High visibility yellow color. Crimp-On - Strip wire and insert into fuse holder. Crimp the connections tightly, and you're done. No additional hardware needed. When selecting a fuse holder, always match the device to the wire being fused. Using an undersized fuse holder will increase electrical resistance in the circuit and reduce performance. NOTE: Never install a fuse with a larger amp rating than specified for the holder.