Proxxon 38520 Oscillating Delta Sander OZI 115/E

• Head of die-cast ZINC provides an exact & stable housing for the moving parts and ensures longevity

• The sanding area 2 1/2" x 2 1/2" x 2 1/2" (65 x 65 x 65 mm) with hook & loop pads

• Oscillating motion outperforms the conventional orbital motion

• No vibration and without any kickback!



Proxxon Detail Sander OZI 115/E is the solution for fine sanding, finishing, polishing, deburring, roughing, paint or silicone removal as well as cutting. The oscillating motion ensures lack of vibration and kickback. This motion also allows the use of cutting blades. The secret for the strong performance is the oscillating motion permitting extremely fine and delicate or more aggressive performance, depending on the accessory used or material worked on. The oscillating motion prevents sandpaper from clogging and it even allows cutting. The powerful permanent magnetic motor has a long lifetime and performs with high torque, which ensures for impressive stock removal. The electronic speed control allows for continuously variable speeds from3,000-10,000 oscillations per minute, so that the tool can be used on wood, steel, non-ferrous metal, glass, ceramics and plastics. The sanding plate has an adhesive pad to accept sandpaper or fleece with hook and loop system. Technical data: Sanding area 2-1/2" x 2-1/2" x 2-1/2" (65 x 65 x 65 mm); Max Power 1/8 hp (100 W); Volts 110 - 120V AC, 60 Hz; Oscillations/minute 3,000 - 10,000; Length 9'' (230 mm); Weight 1.8 lb (800 g). The Delta Sander OZI 115/E is supplied in a new, high-quality PP storage case. It has a strong frame, is extremely stable and large enough to repack in the case without "fiddling around". With lateral sticker for identification of the content. Complete with 4 sanding pads (two 80 and each one 150 and 280 grit), one sanding fleece plus each one hard and soft felt polishing pad.